Home Page-->Product center-->Petrochemicals-->Plastic Rubber Industry


Plas
tic Rubber Industry

Rubber industry solvent oil: (120# solvent oil) The main component of this product is the petroleum distillation fraction of 80≧-120≧. It is usually used as the solvents in rubber industry. The aromatic hydrocarbon content of this product is lowered below 0.3%m/m) and it may be used as a non-carcinogenic paint diluent.

 
Item
Typical Data
Test Method
Top Grade
First Grade
Qualified Product
Density(20≧),kg/m3   not larger than
700
730
GB/T 1884
Distillation Range:
  Initial boiling point,≧  not lower than
110≧ percent recovered,%   not less than
120≧ percent recovered,%   not less than
residue amount,%  not larger than  

80
98

1.0

80
93
98
1.5

80

98
GB/T 6536
Bromine Value,gBr/100g         
0.12
0.14
0.31
SH/T 0236-92
Aromatic Hydrocarbon content,%             not larger than
1.5
3.0
3.0
SH/T 0166-92
Sulfur content,%     
not larger than   
0.018
0.020
0.050
GB/T380-77(88) 1)
Doctor Test
Pass
SH/T0174-92
Soluble Acids and Bases
None
GB/T511 GB/T260
Mechanical Impurity and Water
None
Visual Measurement 2)
Oil Stain
Pass
Visual Measurement 3)

1)Mensurating by SH/T0253 is allowed. When there is any dissidence, arbitrage is available.

2)Inject the sample into a 100ml graduated flask, if the solution is transparent without visible suspending and sedimenting mechanical Impurity and Water, it can be said "without", contra vise "with".

3)Oil examination method: Sieved the leftover of solvent oil distilling test into a clean cuvette or a graduated flask by small filter papers, then suck the filtrate by a sucker and drop it on clean filter papers,after 30 minutes under room temperature(20\3≧), if there is no oil left, it can be deemed qualified.
 

Sample arrangement:

We can arrange the sample to you for your approval, and please check the details as below:

We strongly recommend that the sample to be arranged by air, to be frank, it is the most economical and convinent method till now according to our experience.

The sample itself is free, but our customer will pay for the air freight cost according to the support also requirement from our partners.
 

Thanks for choosing us as your supplier, please contact or by Tel & Fax with the details on the homepage.